Verilog MIPS32 CPU（七）– DIV、DIVU

• Verilog MIPS32 CPU（一）– PC寄存器
• Verilog MIPS32 CPU（二）– Regfiles
• Verilog MIPS32 CPU（三）– ALU
• Verilog MIPS32 CPU（四）– RAM
• Verilog MIPS32 CPU（五）– CP0
• Verilog MIPS32 CPU（六）– MDU
• Verilog MIPS32 CPU（七）– DIV、DIVU
• Verilog MIPS32 CPU（八）– 控制器

module DIVU(
        input [:] dividend,
        input [:] divisor,
        input start,
        input clock,
        input reset,
        output reg over,
        output reg busy,
        output [:] q,
        output [:] r);    reg [:]  count;
    reg [:] reg_q;
    reg [:] reg_r;
    reg [:] reg_b;
    reg r_sign;    wire [:] sub_add = r_sign?({reg_r,q[]} + {'b0,reg_b}):({reg_r,q[31]} - {1'b0,reg_b});
    assign r = r_sign? reg_r + reg_b : reg_r;
    assign q = reg_q;    always @ (posedge clock or posedge reset) begin
        if (reset) begin
            count    <= ;
            busy    <= ;
            over    <= ;
        end
        else if (start)begin
            reg_r    <= ;
            r_sign    <= ;
            reg_q    <= dividend;
            reg_b    <= divisor;
            count    <= ;
            busy    <= ;
        end
        else if (busy) begin
            reg_r    <= sub_add[:];
            r_sign    <= sub_add[];
            reg_q    <= {reg_q[:],~sub_add[]};
            count    <= count +;
            if(count == ) begin
                busy <= ;
                over <= ;
            end
        end
    end endmodulemodule DIV(
        input signed [:] dividend,
        input signed [:] divisor,
        input start,
        input clock,
        input reset,
        output reg over,
        output reg busy,
        output [:] q,
        output reg [:] r);    reg [:] count;
    reg [:] reg_q;
    reg [:] reg_r;
    reg [:] reg_b;
    reg r_sign;     wire [:] sub_add = r_sign?({reg_r,q[]} + {'b0,reg_b}):({reg_r,q[31]} - {1'b0,reg_b});     assign q = reg_q;         always @ (posedge clock or posedge reset)
        if (reset) begin
            count    <= ;
            busy    <= ;
            over    <= ;
        end
        else begin
            if (start) begin
                reg_r    <= ;
                r_sign    <= ;
                if(dividend<)
                    reg_q <= -dividend;
                else
                    reg_q <= dividend;
                if(divisor<)
                    reg_b <= -divisor;
                else
                    reg_b <= divisor;
                count    <= ;
                busy    <= ;
            end
            else if(busy) begin
                if(count<=) begin
                    reg_r    <= sub_add[:];
                    r_sign    <= sub_add[];
                    reg_q    <= {reg_q[:],~sub_add[]};
                    count    <= count + ;
                end
                else begin
                    if(dividend[]^divisor[])
                        reg_q<=-reg_q;
                    if(!dividend[])
                        r<=r_sign? reg_r + reg_b : reg_r;
                    else
                        r<=-(r_sign? reg_r + reg_b : reg_r);
                    busy <= ;
                    over <= ;
                end
            end
        end
endmodule