Puppet自动化部署-前期环境准备（2）

　　在安装Puppet环境之前需要配置好机器的基本配置，如规范网络地址IP、hostname，certname认证名称，ntp时间同步等配置完毕，完善的搭建自动化环境。

1.环境介绍

　　此处实现部署的环境是两台安装Linux Cento6.7 虚拟机，分别是Master,Agent端，实现简单的C/S架构部署

2.针对Master，Agent端配置网络地址

      （1）设置网络IP地址

　　　　此处环境使用的内网网段172.16.29.0/24

【Master】[root@puppet-master ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth1
HWADDR=00:0C:29:C7:D6:71
TYPE=Ethernet
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=172.16.29.130
NETMASK=255.255.255.0
DNS1=114.114.114.114
GATEWAY=172.16.29.2　【Agent】
[root@puppet-agent1 ~]#  vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth1
HWADDR=00:0c:29:14:6d:8a
TYPE=Ethernet
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=172.16.29.129
NETMASK=255.255.255.0
DNS1=114.114.114.114
GATEWAY=172.16.29.2

　　（2）设置主机名称

【Master】端[root@puppet-master ~]# vim /etc/hosts
172.16.29.130 puppet-master.nlf.com puppet-master
172.16.29.129 puppet-agent1.nlf.com puppet-agent1【Agent】端
[root@puppet-agent1 ~]# vim /etc/hosts
172.16.29.130 puppet-master.nlf.com puppet-master
172.16.29.129 puppet-agent1.nlf.com puppet-agent1　　

 3.安全设置

【Selinux】[root@puppet-master ~]# sed -i 's/SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config
[root@puppet-agent1 ~]# sed -i 's/SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config【IPtables】
[root@puppet-master ~]# /etc/init.d/iptables stop
iptables: Setting chains to policy ACCEPT: filter          [  OK  ]
iptables: Flushing firewall rules:                         [  OK  ]
iptables: Unloading modules:                               [  OK  ]
[root@puppet-master ~]# chkconfig iptables off[root@puppet-agent1 ~]# /etc/init.d/iptables stop
iptables: Setting chains to policy ACCEPT: filter          [  OK  ]
iptables: Flushing firewall rules:                         [  OK  ]
iptables: Unloading modules:                               [  OK  ]
[root@puppet-agent1 ~]# chkconfig iptables off

4.配置本地YUM源

[root@puppet-master ~]# mkdir /mnt/iso
[root@puppet-master ~]# mount /dev/sr0 /mnt/iso/
[root@puppet-master ~]# vim /etc/yum.repos.d/puppet-yum.repo
　　[puppet-yum]
　　name="puppet yum for cenots6.7"
　　baseurl=file:///mnt/iso
　　enabled=1
　　gpgcheck=0## Agent端配置同上！！

5.NTP服务器设置

　　（1）查看NTP是否安装

[root@puppet-master ~]# rpm -qa|grep ntp
ntpdate-4.2.6p5-10.el6.centos.1.x86_64
fontpackages-filesystem-1.41-1.1.el6.noarch
ntp-4.2.6p5-10.el6.centos.1.x86_64

## Agent端配置同上！！

[root@puppet-master ~]# vim /etc/ntp.conf
　　driftfile /var/lib/ntp/drift
　　restrict default kod nomodify notrap nopeer noquery
　　restrict -6 default kod nomodify notrap nopeer noquery
　　restrict 127.0.0.1
　　restrict -6 ::1
　　server ntp.sjtu.edu.cn iburst
　　includefile /etc/ntp/crypto/pw
　　keys /etc/ntp/keys[root@puppet-master ~]# /etc/init.d/ntpd start
Starting ntpd:                                             [  OK  ][root@puppet-master ~]# ntpdate ntp.sjtu.edu.cn
21 Dec 11:40:32 ntpdate[22099]: the NTP socket is in use, exiting
[root@puppet-master ~]# chkconfig ntpd on[root@puppet-master ~]# crontab -l     ###设置同步频率
　　*/30 * * * * /usr/sbin/ntpdate ntp.sjtu.edu.cn
[root@puppet-master ~]# /etc/init.d/crond restart
Stopping crond:                                            [  OK  ]
Starting crond:                                            [  OK  ]
## Agent端配置同上！！

　　至此，Puppet初始环境部署完毕！