大家对TCP三次握手比较熟悉了，都知道当发生DOSS攻击时，客户端发送SYN给服务端后，服务端响应SYN+ACK，此时客户端就不回应服务端ACK啦（如果正常建立三次握手客户端会回应ACK，表示三次握手建立成功，服务端状态变为ESTABLISED状态，不了解的小伙伴可以自行百度。），这会导致服务端的SYN-RCVD状态偏多。因此监控TCP的连接数还是很有必要的，当某个SYN-RCVD偏多时，我们就可能猜测服务有异常了，需要人工介入处理。接下来我们就看看zabbix是如何监控TCP的11中状态的。
一.TCP状态扫盲
1>.三次握手
参考链接：https://baike.baidu.com/item/%E4%B8%89%E6%AC%A1%E6%8F%A1%E6%89%8B/5111559?fr=aladdin。
2>.使用netstat命令工具查看TCP的状态
按 Ctrl+C 复制代码按 Ctrl+C 复制代码
3>.命令行中查看服务器TCP的某种状态
[root@node102.yinzhengjie.org.cn ~]# netstat -ant | grep -c LISTEN
4
[root@node102.yinzhengjie.org.cn ~]#
二.zabbix监控TCP状态案例并自定义模板
1>.在zabbix agent端自定义key并重启服务
[root@node102.yinzhengjie.org.cn ~]# cat /etc/zabbix/zabbix_agentd.d/TCP_STATUS.conf
UserParameter=TCP_STATUS[*],netstat -ant | grep -c $1
[root@node102.yinzhengjie.org.cn ~]#
[root@node102.yinzhengjie.org.cn ~]# systemctl restart zabbix-agent
[root@node102.yinzhengjie.org.cn ~]#
[root@node102.yinzhengjie.org.cn ~]# systemctl status zabbix-agent
● zabbix-agent.service - Zabbix Agent
Loaded: loaded (/usr/lib/systemd/system/zabbix-agent.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2019-05-07 07:53:16 PDT; 4s ago
Process: 9416 ExecStop=/bin/kill -SIGTERM $MAINPID (code=exited, status=0/SUCCESS)
Process: 9419 ExecStart=/usr/sbin/zabbix_agentd -c $CONFFILE (code=exited, status=0/SUCCESS)
Main PID: 9422 (zabbix_agentd)
CGroup: /system.slice/zabbix-agent.service
├─9422 /usr/sbin/zabbix_agentd -c /etc/zabbix/zabbix_agentd.conf
├─9423 /usr/sbin/zabbix_agentd: collector [idle 1 sec]
├─9424 /usr/sbin/zabbix_agentd: listener #1 [waiting for connection]
├─9425 /usr/sbin/zabbix_agentd: listener #2 [waiting for connection]
├─9426 /usr/sbin/zabbix_agentd: listener #3 [waiting for connection]
└─9427 /usr/sbin/zabbix_agentd: active checks #1 [idle 1 sec]May 07 07:53:16 node102.yinzhengjie.org.cn systemd[1]: Starting Zabbix Agent...
May 07 07:53:16 node102.yinzhengjie.org.cn systemd[1]: PID file /run/zabbix/zabbix_agentd.pid not readable (yet?) after start.
May 07 07:53:16 node102.yinzhengjie.org.cn systemd[1]: Started Zabbix Agent.
[root@node102.yinzhengjie.org.cn ~]#
2>.服务端验证zabbix agent自定义的key是否生效
[root@node101.yinzhengjie.org.cn ~]# yum -y install zabbix-get
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
epel/x86_64/metalink | 6.0 kB 00:00:00
* base: mirrors.aliyun.com
* epel: mirrors.tuna.tsinghua.edu.cn
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
base | 3.6 kB 00:00:00
epel | 4.7 kB 00:00:00
extras | 3.4 kB 00:00:00
mysql-connectors-community | 2.5 kB 00:00:00
mysql-tools-community | 2.5 kB 00:00:00
mysql56-community | 2.5 kB 00:00:00
updates | 3.4 kB 00:00:00
zabbix | 2.9 kB 00:00:00
zabbix-non-supported | 951 B 00:00:00
(1/5): extras/7/x86_64/primary_db | 201 kB 00:00:00
epel/x86_64/primary_db FAILED
https://mirrors.tuna.tsinghua.edu.cn/epel/7/x86_64/repodata/b46e7947260ac0114fc1b48c782d12377659fe2b8f565a55bcab0cf98b124aa1-primary.sqlite.bz2: [Errno 14] HTTPS Error 404 - Not Found ] 0.0 B/s | 0 B --:--:-- ETA
Trying other mirror.
To address this issue please refer to the below wiki article https://wiki.centos.org/yum-errorsIf above article doesn't help to resolve this issue please use https://bugs.centos.org/.(2/5): mysql-tools-community/x86_64/primary_db | 58 kB 00:00:00
(3/5): epel/x86_64/updateinfo | 994 kB 00:00:01
(4/5): updates/7/x86_64/primary_db | 4.2 MB 00:00:01
(5/5): epel/x86_64/primary_db | 6.7 MB 00:00:04
Resolving Dependencies
--> Running transaction check
---> Package zabbix-get.x86_64 0:4.0.7-1.el7 will be installed
--> Finished Dependency ResolutionDependencies Resolved==================================================================================================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================================================================================================
Installing:
zabbix-get x86_64 4.0.7-1.el7 zabbix 282 kTransaction Summary
==================================================================================================================================================================================================================================
Install 1 PackageTotal download size: 282 k
Installed size: 1.1 M
Downloading packages:
zabbix-get-4.0.7-1.el7.x86_64.rpm | 282 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : zabbix-get-4.0.7-1.el7.x86_64 1/1
Verifying : zabbix-get-4.0.7-1.el7.x86_64 1/1 Installed:
zabbix-get.x86_64 0:4.0.7-1.el7 Complete!
[root@node101.yinzhengjie.org.cn ~]#
[root@node101.yinzhengjie.org.cn ~]# zabbix_get -s node102.yinzhengjie.org.cn -k TCP_STATUS[LISTEN] #需要注意的是:这样取值其实在客户端是以zabbix用户进行取值操作，有些命令需要root用户权限才能执行，因此我们要考虑命令权限的问题哟！
4
[root@node101.yinzhengjie.org.cn ~]#
3>.在zabbix web页面中创建模板
4>.填写相应参数并添加模板
5>.模板添加成功
6>.为模板添加监控项（item）
7>.监控ESTABLISHED状态
8>.克隆上述操作，将其他11中状态监控起来
9>.TCP的12中状态照单全收
三.使用自定义模板
1>.配置主机的监控信息
2>.链接我们自定义的模板
3>.自定义zabbix监控项
4>.刷新配置并查看最新数据
[root@node101.yinzhengjie.org.cn ~]# zabbix_server -R config_cache_reload #在zabbix server端刷新一下配置
zabbix_server [10628]: command sent successfully
[root@node101.yinzhengjie.org.cn ~]#
、
