openMSP430之io_test

openMSP430:　IO functionality test with interupt

#include "omsp_system.h"volatile char shift = 0x01;  // Global variableint main(void) 
{    WDTCTL = WDTPW | WDTHOLD;          // Disable watchdog timer    P2DIR  = 0xff;                     // Port 2.0-2.7 = output
    P2OUT  = shift;　　　　　　          // Initialize Port 2    P1DIR  = 0x00;                     // Port 1.0-1.7 = input
    P1IE   = 0x01;                     // Port 1.0 interrupt enabled
    P1IES  = 0x00;                     // Port 1.0 interrupt edge selection (0=pos 1=neg)
    P1IFG  = 0x00;                     // Clear all Port 1 interrupt flags (just in case)    eint();                            // Enable interrupts    while () 
　　{
      if (P2OUT == 0x00)
　　   {
   　　　　P2OUT = shift;
     　}
　　　 else if (shift == 0x01)
　　　 {
　　　　　P2OUT = (P2OUT << );
      }
　　　 else 
　　　 {
    　　　P2OUT = (P2OUT >> );
       }
    }
} // Port1 Interrupt Service Routine
interrupt(PORT1_VECTOR) port1_isr(void) 
{
   if (P1IFG & 0x01) 
   {
     shift　　^=  0x81;
     P1IFG   &= ~0x01;　　// Clear Port 1.0 interrupt flag
   }
}