在C#串口通信开发过程中有的产家只提供通信协议，这时候开发人员要自己根据协议来封装方法，有的产家比较人性化提供了封装好的通信协议方法供开发人员调用。
1、只提供通信协议(例如，今年早些时候开发的出钞机)：
如：
/// <summary>
/// 出钞 DISPENSE(0x45)
/// </summary>
public void Chuchao()
{
log(“出钞设备出钞”);
if (!sp.IsOpen)
{
sp.Open();
}
try
{
var send = new byte[] { Eot, Id, Stx, Dipsense, 48, 51, Etx, 0x01 };
int bcc = 0;
for (int i = 0; i < send.Length – 1; i++)
bcc ^= send[i];
send[send.Length – 1] = (byte)bcc;
sp.Write(send, 0, send.Length);
log(“操作命令：” + GetBytesString(send, 0, send.Length, ” “));
for (int i = 0; i < 3; i++)
{
var r = sp.ReadByte();
log(“发送命令，收到的反馈。” + r);
if (r != Ack)
{
sp.Write(send, 0, send.Length);
}
else
{
break;
}
}
byte[] recive = new byte[14];
for (int i = 0; i < 3; i++)
{
bcc = 0;
recive = GetData(recive.Length);
for (int j = 0; j < recive.Length – 1; j++)
{
bcc ^= recive[j];
}
if (bcc != recive[recive.Length – 1])
{
sp.Write(new byte[] { Nck }, 0, 1);
log(“收到信息：” + GetBytesString(recive, 0, recive.Length, ” “) + “,接收标识：NCK：失败”);
}
else
{
sp.Write(new byte[] { Ack }, 0, 1);
log(“收到信息：” + GetBytesString(recive, 0, recive.Length, ” “) + “,接收标识：ACK：成功”);
break;
}
}
Error errorCode = new Error();
errorCode.Code = recive[9];
log(“接收到的命令：” + recive[3] + “,接收到的错误码:” + errorCode.Code + “–” + errorCode.ErrorMsg);
if (recive[3] != Dipsense || errorCode.Code > 0x31)
{
throw new Exception(“出钞出错”);
}
}
catch (Exception e)
{
log(e.ToString());
//throw;
}
finally
{
if (sp.IsOpen)
{
sp.Close();
}
}
}
2、产家提供通信协议方法(例如，今年早些时候开发的银行卡支付机)：
这时候你只要在你的项目bin/Debug下面添加产家提供的dll，然后，再这样：
/// <summary>
/// 打开串口
/// </summary>
/// <param name="port">串口号字符串</param>
/// <returns>
/// 串口文件句柄
/// 备注:必须先调用此函数，获得指定串口的串口文件句柄，才可调用其他函数。
/// 可以同时打开多个串口，获得多个串口文件句柄，但不能多次打开同一个串口。
/// 使用完毕后，必须调用CommClose()关闭串口。
/// </returns>
[DllImport("CRT_310.dll", EntryPoint = "CommOpen", SetLastError = true, CharSet = CharSet.Ansi, ExactSpelling = true, CallingConvention = CallingConvention.StdCall)]
public static extern IntPtr CommOpen(string port); /// <summary>
/// 按指定的波特率打开串口 (该函数完成的功能= CommOpen 函数+ CommSetting 函数)
/// </summary>
/// <param name="port">串口号字符串</param>
/// <param name="data">指定波特率
/// 波特率=1200，2400，4800，9600，19200，38400。
/// 例如:CommOpen("Com1",9600);
/// </param>
/// <returns>串口文件句柄
/// 备注:必须先调用此函数，获得指定串口的串口文件句柄，才可调用其他函数。
/// 可以同时打开多个串口，获得多个串口文件句柄，但不能多次打开同一个串口。
/// 使用完毕后，必须调用CommClose()关闭串口。</returns>
[DllImport("CRT_310.dll", EntryPoint = "CommOpenWithBaut", SetLastError = true, CharSet = CharSet.Ansi, ExactSpelling = true, CallingConvention = CallingConvention.StdCall)]
public static extern IntPtr CommOpenWithBaut(string port, uint data);
然后就可以像这样调用了：
public string CardBoxPositionToRead()
{
var comHandle = new IntPtr();
var cardStates = new byte[2];
var recordInfo = new byte[200];
int? data;
try
{
comHandle = PackageK100Dll.M100A_CommOpenWithBaud(ComPort, BaudRate);
if (comHandle.ToInt32() == 0)
{
PackageK100Dll.M100A_CommClose(comHandle);
return "打开串口失败！";
}
data = PackageK100Dll.M100A_CheckCardPosition(comHandle, false, 0, cardStates, recordInfo);
if (data != 0)
{
PackageK100Dll.M100A_CommClose(comHandle);
return "读取卡片位置失败";
}
switch (cardStates[0])
{
//通道无卡
case 48:
break;
case 49:
case 50:
data = PackageK100Dll.M100A_MoveCard(comHandle, false, 0, 0x34, recordInfo);
if (data != 0)
{
PackageK100Dll.M100A_CommClose(comHandle);
return "移动卡片位置失败";
}
break;
//通道有卡
default:
PackageK100Dll.M100A_CommClose(comHandle);
return "请取走卡片或者业务正在办理，请稍候！";
}
switch (cardStates[1])
{
case 48:
PackageK100Dll.M100A_CommClose(comHandle);
return "卡箱无卡";
default:
//将卡槽卡片移动到读写卡位置
data = PackageK100Dll.M100A_MoveCard(comHandle, false, 0, 0x30, recordInfo);
if (data != 0)
{
PackageK100Dll.M100A_CommClose(comHandle);
return "移动卡片位置失败";
}
PackageK100Dll.M100A_CommClose(comHandle);
return "true";
} }
catch (Exception)
{
PackageK100Dll.M100A_CommClose(comHandle);
return "发生异常";
}
}
