二进制手动部署kubernetes 1.10.10

转载于：https://www.jevic.cn/2018/09/23/kuberentes-1.10.10/?tdsourcetag=s_pcqq_aiomsg#heapster

通读一遍在实际操作!!! 关于镜像请查看最后的补充说明部署脚本查看仓库脚本

一. 系统环境

CentOS Linux release 7.2.1511 (Core)

IP地址	主机名	Docker 版本	kubernetes 版本
192.168.2.219	master219	18.06.0-ce	v1.10.10
192.168.2.220	node220	18.06.0-ce	v1.10.10
192.168.2.221	node221	18.06.0-ce	v1.10.10

初始化

1.1 配置ssh

ssh-keygen -t rsa
一路回车....将公钥添加到每个节点

批量执行脚本:

[root@master219 bin]# pwd
/usr/local/bin
[root@master219 bin]# cat cmd
#!/bin/bash
## 批量执行命令
iplist="node220 node221"for i in $iplist
do
   echo -e "\033[32mssh $i \"$*\"\033[0m"
   ssh $i "$*"
done
[root@master219 bin]# cat rsy
#!/bin/bash
## 批量同步文件
iplist="node220 node221"for i in $iplist
do
   echo -e "\033[32mscp -r $1 $i:$2\033[0m"
   scp -r $1 $i:$2
done

1.2 系统配置

所有节点都需要执行下列操作

setenforce 0
sed -i 's/SELINUX=enforcing/SELINUX=disalbe/g' /etc/sysconfig/selinuxcat >> /etc/security/limits.conf <<EOF
* soft nofile 65536
* hard nofile 65536
* soft nproc unlimited
* hard nproc unlimited
EOFswapoff -acat >> /etc/sysctl.conf <<EOF
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_forward=1
net.ipv4.tcp_tw_recycle=0
vm.swappiness=0
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.ipv6.conf.all.disable_ipv6=1
net.netfilter.nf_conntrack_max=2310720
EOFsystemctl stop firewalld && systemctl disable firewalld
yum makecache fast
yum install -y epel-release
yum install -y conntrack ipvsadm ipset jq sysstat curl iptables libseccomp ntpdate
ntpdate cn.pool.ntp.org

1.3 Install Docker

参考官方文档

yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
yum list docker-ce --showduplicates | sort -r
yum -y install docker-ce-18.06.0.ce
systemctl start docker && systemctl stop docker
cat > /etc/docker/daemon.json <<EOF
{
  "registry-mirrors": ["https://dlvqhrac.mirror.aliyuncs.com"]
}
EOFsystemctl daemon-reload
systemctl start docker
systemctl enable docker

二. 安装cfssl

https://github.com/cloudflare/cfssl/releases

只需要在master节点安装使用即可，后续证书同步到其他节点即可

tar -zxvf cfssl.tar.gz
mv cfssl cfssljson /usr/local/bin
chmod +x /usr/local/bin/cfssl /usr/local/bin/cfssljson
rm -f cfssl.tar.gz

三. ETCD

下载链接

创建etcd 用户来启动!! 注意用户权限

3.1 证书

etcd-csr.json

{
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "O": "etcd",
      "OU": "etcd Security",
      "L": "Shengzhen",
      "ST": "Shengzhen",
      "C": "CN"
    }
  ],
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "localhost",
    "192.168.2.219",
    "192.168.2.220",
    "192.168.2.221"
  ]
}

etcd-gencert.json

{
  "signing": {
    "default": {
        "usages": [
          "signing",
          "key encipherment",
          "server auth",
          "client auth"
        ],
        "expiry": "87600h"
    }
  }
}

etcd-root-ca-csr.json

{
  "key": {
    "algo": "rsa",
    "size": 4096
  },
  "names": [
    {
      "O": "etcd",
      "OU": "etcd Security",
      "L": "Shengzhen",
      "ST": "Shengzhen",
      "C": "CN"
    }
  ],
  "CN": "etcd-root-ca"
}

生成证书

cfssl gencert --initca=true etcd-root-ca-csr.json | cfssljson --bare etcd-root-ca
cfssl gencert --ca etcd-root-ca.pem --ca-key etcd-root-ca-key.pem --config etcd-gencert.json etcd-csr.json | cfssljson --bare etcd[root@master219 ssl]# ls
etcd.csr  etcd-csr.json  etcd-gencert.json  etcd-key.pem  etcd.pem  etcd-root-ca.csr  etcd-root-ca-csr.json  etcd-root-ca-key.pem  etcd-root-ca.pem

3.2 etcd.conf

# [member]
ETCD_NAME=etcd1
ETCD_DATA_DIR="/var/lib/etcd/etcd1.etcd"
ETCD_WAL_DIR="/var/lib/etcd/wal"
ETCD_SNAPSHOT_COUNT="100"
ETCD_HEARTBEAT_INTERVAL="100"
ETCD_ELECTION_TIMEOUT="1000"
ETCD_LISTEN_PEER_URLS="https://192.168.2.219:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.2.219:2379,http://127.0.0.1:2379"
ETCD_MAX_SNAPSHOTS="5"
ETCD_MAX_WALS="5"
#ETCD_CORS=""
# [cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.2.219:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.2.219:2379"
# if you use different ETCD_NAME (e.g. test), set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.2.219:2380,etcd2=https://192.168.2.220:2380,etcd3=https://192.168.2.221:2380"
ETCD_INITIAL_CLUSTER_STATE="new"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_STRICT_RECONFIG_CHECK="false"
#ETCD_AUTO_COMPACTION_RETENTION="0"
# [proxy]
#ETCD_PROXY="off"
#ETCD_PROXY_FAILURE_WAIT="5000"
#ETCD_PROXY_REFRESH_INTERVAL="30000"
#ETCD_PROXY_DIAL_TIMEOUT="1000"
#ETCD_PROXY_WRITE_TIMEOUT="5000"
#ETCD_PROXY_READ_TIMEOUT="0"
# [security]
ETCD_CERT_FILE="/etc/etcd/ssl/etcd.pem"
ETCD_KEY_FILE="/etc/etcd/ssl/etcd-key.pem"
ETCD_CLIENT_CERT_AUTH="true"
ETCD_TRUSTED_CA_FILE="/etc/etcd/ssl/etcd-root-ca.pem"
ETCD_AUTO_TLS="true"
ETCD_PEER_CERT_FILE="/etc/etcd/ssl/etcd.pem"
ETCD_PEER_KEY_FILE="/etc/etcd/ssl/etcd-key.pem"
ETCD_PEER_CLIENT_CERT_AUTH="true"
ETCD_PEER_TRUSTED_CA_FILE="/etc/etcd/ssl/etcd-root-ca.pem"
ETCD_PEER_AUTO_TLS="true"
# [logging]
#ETCD_DEBUG="false"
# examples for -log-package-levels etcdserver=WARNING,security=DEBUG
#ETCD_LOG_PACKAGE_LEVELS=""

3.3 etcd.service

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=-/etc/etcd/etcd.conf
User=etcd
# set GOMAXPROCS to number of processors
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /usr/local/bin/etcd --name=\"${ETCD_NAME}\" --data-dir=\"${ETCD_DATA_DIR}\" --listen-client-urls=\"${ETCD_LISTEN_CLIENT_URLS}\""
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

3.4 安装启动

install.sh

#!/bin/bash
set -e
ETCD_VERSION="3.2.18"preinstall(){
    getent group etcd >/dev/null || groupadd -r etcd
    getent passwd etcd >/dev/null || useradd -r -g etcd -d /var/lib/etcd -s /sbin/nologin -c "etcd user" etcd
}install(){
    echo -e "\033[32mINFO: Copy etcd...\033[0m"
    tar -zxvf etcd-v${ETCD_VERSION}-linux-amd64.tar.gz
    cp etcd-v${ETCD_VERSION}-linux-amd64/etcd* /usr/local/bin
    rm -rf etcd-v${ETCD_VERSION}-linux-amd64
    echo -e "\033[32mINFO: Copy etcd config...\033[0m"
    cp -r conf /etc/etcd
    chown -R etcd:etcd /etc/etcd
    chmod -R 755 /etc/etcd/ssl
    echo -e "\033[32mINFO: Copy etcd systemd config...\033[0m"
    cp etcd.service /lib/systemd/system
    systemctl daemon-reload
}postinstall(){
    if [ ! -d "/var/lib/etcd" ]; then
        mkdir /var/lib/etcd
        chown -R etcd:etcd /var/lib/etcd
    fi
}preinstall
install
postinstall

目录结构:

etcd/
├── conf
│   ├── etcd.conf
│   └── ssl
│       ├── etcd.csr
│       ├── etcd-csr.json
│       ├── etcd-gencert.json
│       ├── etcd-key.pem
│       ├── etcd.pem
│       ├── etcd-root-ca.csr
│       ├── etcd-root-ca-csr.json
│       ├── etcd-root-ca-key.pem
│       └── etcd-root-ca.pem
├── etcd.service
├── etcd-v3.2.18-linux-amd64.tar.gz
└── install.sh

创建对应目录以及相关文件，保存 install.sh 脚本;将整个目录同步到各个节点执行即可；然后在各个节点修改对应的etcd 名称及IP即可；

注意:三个节点同时执行此操作否则单个启动会卡死在那里;
使用前面配置的cmd 命令批量执行

# systemctl start etcd
# cmd systemctl enable etcd

export ETCDCTL_API=3
etcdctl --cacert=/etc/etcd/ssl/etcd-root-ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://192.168.2.219:2379,https://192.168.2.220:2379,https://192.168.2.221:2379 endpoint healthhttps://192.168.2.221:2379 is healthy: successfully committed proposal: took = 2.077429ms
https://192.168.2.219:2379 is healthy: successfully committed proposal: took = 1.421477ms
https://192.168.2.220:2379 is healthy: successfully committed proposal: took = 2.222464ms

四. kubernetes

基于 hyperkube 二进制手动安装
hyperkube是一个集成二进制运行文件
可以使用“hyperkube kubelet …”来启动kubelet ，用“hyperkube apiserver …”运行apiserver 等等。

4.1 证书

由于 kubelet 和 kube-proxy 用到的 kubeconfig 配置文件需要借助 kubectl 来生成，所以需要先安装一下 kubectl

curl https://storage.googleapis.com/kubernetes-release/release/v1.10.10/bin/linux/amd64/hyperkube -o hyperkube-1.10.10
chmod +x hyperkube_1.10.10
cp hyperkube_1.10.10 /usr/local/bin/hyperkube
ln -s /usr/local/bin/hyperkube /usr/local/bin/kubectl

curl 代理配置

admin-csr.json

{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Shengzhen",
      "L": "Shengzhen",
      "O": "system:masters",
      "OU": "System"
    }
  ]
}

k8s-gencert.json

{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "87600h"
      }
    }
  }
}

k8s-root-ca-csr.json

{
  "CN": "kubernetes",
  "key": {
    "algo": "rsa",
    "size": 4096
  },
  "names": [
    {
      "C": "CN",
      "ST": "Shengzhen",
      "L": "Shengzhen",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

kube-apiserver-csr.json

{
    "CN": "kubernetes",
    "hosts": [
        "127.0.0.1",
        "10.254.0.1",
        "192.168.2.219",
        "192.168.2.220",
        "192.168.2.221",
        "*.kubernetes.master",
        "localhost",
        "kubernetes",
        "kubernetes.default",
        "kubernetes.default.svc",
        "kubernetes.default.svc.cluster",
        "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "Shengzhen",
            "L": "Shengzhen",
            "O": "k8s",
            "OU": "System"
        }
    ]
}

kube-proxy-csr.json

{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Shengzhen",
      "L": "Shengzhen",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

4.1.1 生成证书和配置

# 生成 CA
cfssl gencert --initca=true k8s-root-ca-csr.json | cfssljson --bare k8s-root-ca# 依次生成其他组件证书
for targetName in kube-apiserver admin kube-proxy; do
    cfssl gencert --ca k8s-root-ca.pem --ca-key k8s-root-ca-key.pem --config k8s-gencert.json --profile kubernetes $targetName-csr.json | cfssljson --bare $targetName
done# 地址默认为 127.0.0.1:6443
# 如果在 master 上启用 kubelet 请在生成后的 kubeconfig 中
# 修改该地址为 当前MASTER_IP:6443
KUBE_APISERVER="https://127.0.0.1:6443"
BOOTSTRAP_TOKEN=$(head -c 16 /dev/urandom | od -An -t x | tr -d ' ')
echo "Tokne: ${BOOTSTRAP_TOKEN}"# 不要质疑 system:bootstrappers 用户组是否写错了，有疑问请参考官方文档
# https://kubernetes.io/docs/admin/kubelet-tls-bootstrapping/
cat > token.csv <<EOF
${BOOTSTRAP_TOKEN},kubelet-bootstrap,10001,"system:bootstrappers"
EOFecho "Create kubelet bootstrapping kubeconfig..."
# 设置集群参数
kubectl config set-cluster kubernetes \
  --certificate-authority=k8s-root-ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=bootstrap.kubeconfig
# 设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap \
  --token=${BOOTSTRAP_TOKEN} \
  --kubeconfig=bootstrap.kubeconfig
# 设置上下文参数
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet-bootstrap \
  --kubeconfig=bootstrap.kubeconfig
# 设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfigecho "Create kube-proxy kubeconfig..."
# 设置集群参数
kubectl config set-cluster kubernetes \
  --certificate-authority=k8s-root-ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-proxy.kubeconfig
# 设置客户端认证参数
kubectl config set-credentials kube-proxy \
  --client-certificate=kube-proxy.pem \
  --client-key=kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig
# 设置上下文参数
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig
# 设置默认上下文
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig# 创建高级审计配置
cat >> audit-policy.yaml <<EOF
# Log all requests at the Metadata level.
apiVersion: audit.k8s.io/v1beta1
kind: Policy
rules:
- level: Metadata
EOF

生成后的文件

ssl
├── admin.csr
├── admin-csr.json
├── admin-key.pem
├── admin.pem
├── audit-policy.yaml
├── bootstrap.kubeconfig
├── genconfig.sh
├── k8s-gencert.json
├── k8s-root-ca.csr
├── k8s-root-ca-csr.json
├── k8s-root-ca-key.pem
├── k8s-root-ca.pem
├── kube-apiserver.csr
├── kube-apiserver-csr.json
├── kube-apiserver-key.pem
├── kube-apiserver.pem
├── kube-proxy.csr
├── kube-proxy-csr.json
├── kube-proxy-key.pem
├── kube-proxy.kubeconfig
├── kube-proxy.pem
└── token.csv

4.2 systemd 配置

kube-apiserver.service

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
After=etcd.service
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
User=root
ExecStart=/usr/local/bin/hyperkube apiserver \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBE_ETCD_SERVERS \
            $KUBE_API_ADDRESS \
            $KUBE_API_PORT \
            $KUBELET_PORT \
            $KUBE_ALLOW_PRIV \
            $KUBE_SERVICE_ADDRESSES \
            $KUBE_ADMISSION_CONTROL \
            $KUBE_API_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

kube-controller-manager.service

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
User=root
ExecStart=/usr/local/bin/hyperkube controller-manager \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBE_MASTER \
            $KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

kubelet.service

[Unit]
Description=Kubernetes Kubelet Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/kubelet
ExecStart=/usr/local/bin/hyperkube kubelet \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBELET_API_SERVER \
            $KUBELET_ADDRESS \
            $KUBELET_PORT \
            $KUBELET_HOSTNAME \
            $KUBE_ALLOW_PRIV \
            $KUBELET_ARGS
Restart=on-failure
KillMode=process
[Install]
WantedBy=multi-user.target

kube-proxy.service

[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/usr/local/bin/hyperkube proxy \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBE_MASTER \
            $KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

kube-scheduler.service

[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
User=root
ExecStart=/usr/local/bin/hyperkube scheduler \
            $KUBE_LOGTOSTDERR \
            $KUBE_LOG_LEVEL \
            $KUBE_MASTER \
            $KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

4.3 配置文件

4.3.1 master 节点配置

Master 节点主要会运行 3 各组件: kube-apiserver、kube-controller-manager、kube-scheduler，其中用到的配置文件如下

config

config 是一个通用配置文件，值得注意的是由于安装时对于 Node、Master 节点都会包含该文件; 在 Node 节点上请注释掉 KUBE_MASTER 变量，因为 Node 节点需要做 HA，要连接本地的 6443 加密端口；而这个变量将会覆盖 kubeconfig 中指定的 127.0.0.1:6443 地址

###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=2"# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=true"# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://127.0.0.1:8080"

apiserver

apiserver 配置相对于 1.8 略有变动，其中准入控制器(admission control)选项名称变为了 –enable-admission-plugins，控制器列表也有相应变化，这里采用官方推荐配置，具体请参考官方文档

###
# kubernetes system config
#
# The following values are used to configure the kube-apiserver
#
# The address on the local server to listen to.
KUBE_API_ADDRESS="--advertise-address=192.168.2.219 --bind-address=192.168.2.219"
# The port on the local server to listen on.
KUBE_API_PORT="--secure-port=6443"
# Port minions listen on
# KUBELET_PORT="--kubelet-port=10250"
# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=https://192.168.2.219:2379,https://192.168.2.220:2379,https://192.168.2.221:2379"
# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"
# default admission control policies
KUBE_ADMISSION_CONTROL="--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota,NodeRestriction"
# Add your own!
KUBE_API_ARGS=" --anonymous-auth=false \
                --apiserver-count=3 \
                --audit-log-maxage=30 \
                --audit-log-maxbackup=3 \
                --audit-log-maxsize=100 \
                --audit-log-path=/var/log/kube-audit/audit.log \
                --audit-policy-file=/etc/kubernetes/audit-policy.yaml \
                --authorization-mode=Node,RBAC \
                --client-ca-file=/etc/kubernetes/ssl/k8s-root-ca.pem \
                --enable-bootstrap-token-auth \
                --enable-garbage-collector \
                --enable-logs-handler \
                --enable-swagger-ui \
                --etcd-cafile=/etc/etcd/ssl/etcd-root-ca.pem \
                --etcd-certfile=/etc/etcd/ssl/etcd.pem \
                --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \
                --etcd-compaction-interval=5m0s \
                --etcd-count-metric-poll-period=1m0s \
                --event-ttl=48h0m0s \
                --kubelet-https=true \
                --kubelet-timeout=3s \
                --log-flush-frequency=5s \
                --token-auth-file=/etc/kubernetes/token.csv \
                --tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \
                --tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \
                --service-node-port-range=30000-50000 \
                --service-account-key-file=/etc/kubernetes/ssl/k8s-root-ca.pem \
                --storage-backend=etcd3 \
                --enable-swagger-ui=true"

controller-manager

controller manager 配置默认开启了证书轮换能力用于自动签署 kueblet 证书，并且证书时间也设置了 10 年，可自行调整；增加了 –controllers 选项以指定开启全部控制器

###
# The following values are used to configure the kubernetes controller-manager
# defaults from config and apiserver should be adequate
# Add your own!
KUBE_CONTROLLER_MANAGER_ARGS="  --bind-address=0.0.0.0 \
                                --cluster-name=kubernetes \
                                --cluster-signing-cert-file=/etc/kubernetes/ssl/k8s-root-ca.pem \
                                --cluster-signing-key-file=/etc/kubernetes/ssl/k8s-root-ca-key.pem \
                                --controllers=*,bootstrapsigner,tokencleaner \
                                --deployment-controller-sync-period=10s \
                                --experimental-cluster-signing-duration=86700h0m0s \
                                --leader-elect=true \
                                --node-monitor-grace-period=40s \
                                --node-monitor-period=5s \
                                --pod-eviction-timeout=5m0s \
                                --terminated-pod-gc-threshold=50 \
                                --root-ca-file=/etc/kubernetes/ssl/k8s-root-ca.pem \
                                --service-account-private-key-file=/etc/kubernetes/ssl/k8s-root-ca-key.pem \
                                --feature-gates=RotateKubeletServerCertificate=true"

scheduler

###
# kubernetes scheduler config# default config should be adequate# Add your own!
KUBE_SCHEDULER_ARGS="   --address=0.0.0.0 \
                        --leader-elect=true \
                        --algorithm-provider=DefaultProvider"

4.3.2 node 节点配置

Node 节点上主要有 kubelet、kube-proxy 组件，用到的配置如下

kubelet

kubeket 默认也开启了证书轮换能力以保证自动续签相关证书，同时增加了 –node-labels 选项为 node 打一个标签，关于这个标签最后部分会有讨论，如果在 master 上启动 kubelet，请将 node-role.kubernetes.io/k8s-node=true 修改为 node-role.kubernetes.io/k8s-master=true

###
# kubernetes kubelet (minion) config
# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--node-ip=192.168.2.219"
# The port for the info server to serve on
# KUBELET_PORT="--port=10250"
# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=master219"
# location of the api-server
# KUBELET_API_SERVER=""
# Add your own!
KUBELET_ARGS="  --bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig \
                --cert-dir=/etc/kubernetes/ssl \
                --cgroup-driver=cgroupfs \
                --cluster-dns=10.254.0.2 \
                --cluster-domain=cluster.local. \
                --fail-swap-on=false \
                --feature-gates=RotateKubeletClientCertificate=true,RotateKubeletServerCertificate=true \
                --node-labels=node-role.kubernetes.io/master=true \
                --image-gc-high-threshold=70 \
                --image-gc-low-threshold=50 \
                --kube-reserved=cpu=500m,memory=512Mi,ephemeral-storage=1Gi \
                --kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
                --system-reserved=cpu=1000m,memory=1024Mi,ephemeral-storage=1Gi \
                --serialize-image-pulls=false \
                --sync-frequency=30s \
                --pod-infra-container-image=k8s.gcr.io/pause-amd64:3.0 \
                --resolv-conf=/etc/resolv.conf \
                --rotate-certificates"

proxy

###
# kubernetes proxy config
# default config should be adequate
# Add your own!
KUBE_PROXY_ARGS="--bind-address=0.0.0.0 \
                 --hostname-override=node219 \
                 --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig \
                 --cluster-cidr=10.254.0.0/16"

4.4 启动 Master 节点

创建相关目录否则报错

mkdir /var/log/kube-audit
mkdir /var/lib/kubelet
mkdir /usr/libexec

cp -a conf /etc/kubernetes
cp systemd/*.service /lib/systemd/system
systemctl daemon-reload

对于 master 节点启动无需做过多处理，多个 master 只要保证 apiserver 等配置中的 ip 地址监听没问题后直接启动即可

systemctl daemon-reload
systemctl start kube-apiserver
systemctl start kube-controller-manager
systemctl start kube-scheduler
systemctl enable kube-apiserver
systemctl enable kube-controller-manager
systemctl enable kube-scheduler

启动后:

4.5 启动 Node 节点

由于 HA 等功能需要，对于 Node 需要做一些处理才能启动，主要有以下两个地方需要处理

4.5.1 nginx-proxy (node节点部署)

在启动 kubelet、kube-proxy 服务之前，需要在本地启动 nginx 来 tcp 负载均衡 apiserver 6443 端口，nginx-proxy 使用 docker + systemd 启动，配置如下

nginx-proxy.service

[Unit]
Description=kubernetes apiserver docker wrapper
Wants=docker.socket
After=docker.service[Service]
User=root
PermissionsStartOnly=true
ExecStart=/usr/bin/docker run -p 127.0.0.1:6443:6443 \
                              -v /etc/nginx:/etc/nginx \
                              --name nginx-proxy \
                              --net=host \
                              --restart=on-failure:5 \
                              --memory=512M \
                              nginx:1.13.12-alpine
ExecStartPre=-/usr/bin/docker rm -f nginx-proxy
ExecStop=/usr/bin/docker stop nginx-proxy
Restart=always
RestartSec=15s
TimeoutStartSec=30s[Install]
WantedBy=multi-user.target

nginx.conf

error_log stderr notice;worker_processes auto;
events {
        multi_accept on;
        use epoll;
        worker_connections 1024;
}stream {
    upstream kube_apiserver {
        least_conn;
        server 192.168.2.219:6443; ## 多个master 依次配置即可
        # server x.x.x.x:6443;
    }    server {
        listen        0.0.0.0:6443;
        proxy_pass    kube_apiserver;
        proxy_timeout 10m;
        proxy_connect_timeout 1s;
    }
}

启动 apiserver 的本地负载均衡

mkdir /etc/nginx
cp nginx.conf /etc/nginx
cp nginx-proxy.service /lib/systemd/systemsystemctl daemon-reload
systemctl start nginx-proxy
systemctl enable nginx-proxy

4.5.2 TLS bootstrapping

创建好 nginx-proxy 后不要忘记为 TLS Bootstrap 创建相应的 RBAC 规则，这些规则能实现证自动签署 TLS Bootstrap 发出的 CSR 请求，从而实现证书轮换(创建一次即可);

tls-bootstrapping-clusterrole.yaml

# A ClusterRole which instructs the CSR approver to approve a node requesting a
# serving cert matching its client cert.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: system:certificates.k8s.io:certificatesigningrequests:selfnodeserver
rules:
- apiGroups: ["certificates.k8s.io"]
  resources: ["certificatesigningrequests/selfnodeserver"]
  verbs: ["create"]

在 master 执行创建

# 给与 kubelet-bootstrap 用户进行 node-bootstrapper 的权限
kubectl create clusterrolebinding kubelet-bootstrap \
    --clusterrole=system:node-bootstrapper \
    --user=kubelet-bootstrapkubectl create -f tls-bootstrapping-clusterrole.yaml# 自动批准 system:bootstrappers 组用户 TLS bootstrapping 首次申请证书的 CSR 请求
kubectl create clusterrolebinding node-client-auto-approve-csr \
        --clusterrole=system:certificates.k8s.io:certificatesigningrequests:nodeclient \
        --group=system:bootstrappers# 自动批准 system:nodes 组用户更新 kubelet 自身与 apiserver 通讯证书的 CSR 请求
kubectl create clusterrolebinding node-client-auto-renew-crt \
        --clusterrole=system:certificates.k8s.io:certificatesigningrequests:selfnodeclient \
        --group=system:nodes# 自动批准 system:nodes 组用户更新 kubelet 10250 api 端口证书的 CSR 请求
kubectl create clusterrolebinding node-server-auto-renew-crt \
        --clusterrole=system:certificates.k8s.io:certificatesigningrequests:selfnodeserver \
        --group=system:nodes

4.5.3 启动

多节点部署时先启动好 nginx-proxy，然后修改好相应配置的 ip 地址等配置，最终直接启动即可(master 上启动 kubelet 不要忘了修改 kubeconfig 中的 apiserver 地址，还有对应的 kubelet 的 node label)

systemctl daemon-reload
systemctl start kubelet
systemctl start kube-proxy
systemctl enable kubelet
systemctl enable kube-proxy

4.5.4 master 节点启动 kubelet

注意: 对于在 master 节点启动 kubelet 来说，只需要修改 kubelet.kubeconfig、kube-proxy.kubeconfig 中的 apiserver 地址为当前 master ip 6443 端口即可

# grep server kube-proxy.kubeconfig
server: https://192.168.2.219:6443
# grep server bootstrap.kubeconfig
server: https://192.168.2.219:6443systemctl daemon-reload
systemctl start kubelet
systemctl start kube-proxy
systemctl enable kubelet
systemctl enable kube-proxy

最终成功启动后:

五. Calico

5.1 修改calico 配置

#wget https://docs.projectcalico.org/v3.1/getting-started/kubernetes/installation/hosted/calico.yaml -O calico.example.yamlETCD_CERT=`cat /etc/etcd/ssl/etcd.pem | base64 | tr -d '\n'`
ETCD_KEY=`cat /etc/etcd/ssl/etcd-key.pem | base64 | tr -d '\n'`
ETCD_CA=`cat /etc/etcd/ssl/etcd-root-ca.pem | base64 | tr -d '\n'`
ETCD_ENDPOINTS="https://192.168.2.219:2379,https://192.168.2.220:2379,https://192.168.2.221:2379"cp calico.example.yaml calico.yamlsed -i "s@.*etcd_endpoints:.*@\ \ etcd_endpoints:\ \"${ETCD_ENDPOINTS}\"@gi" calico.yamlsed -i "s@.*etcd-cert:.*@\ \ etcd-cert:\ ${ETCD_CERT}@gi" calico.yaml
sed -i "s@.*etcd-key:.*@\ \ etcd-key:\ ${ETCD_KEY}@gi" calico.yaml
sed -i "s@.*etcd-ca:.*@\ \ etcd-ca:\ ${ETCD_CA}@gi" calico.yamlsed -i 's@.*etcd_ca:.*@\ \ etcd_ca:\ "/calico-secrets/etcd-ca"@gi' calico.yaml
sed -i 's@.*etcd_cert:.*@\ \ etcd_cert:\ "/calico-secrets/etcd-cert"@gi' calico.yaml
sed -i 's@.*etcd_key:.*@\ \ etcd_key:\ "/calico-secrets/etcd-key"@gi' calico.yaml# 注释掉 calico-node 部分(由 Systemd 接管)
sed -i '123,219s@.*@#&@gi' calico.yaml

5.2 创建systemd 文件

需要在每个节点(master和node)执行

K8S_MASTER_IP="192.168.2.219"
HOSTNAME=`cat /etc/hostname`
ETCD_ENDPOINTS="https://192.168.2.219:2379,https://192.168.2.220:2379,https://192.168.2.221:2379"cat > /lib/systemd/system/calico-node.service <<EOF
[Unit]
Description=calico node
After=docker.service
Requires=docker.service[Service]
User=root
Environment=ETCD_ENDPOINTS=${ETCD_ENDPOINTS}
PermissionsStartOnly=true
ExecStart=/usr/bin/docker run   --net=host --privileged --name=calico-node \\
                                -e ETCD_ENDPOINTS=${ETCD_ENDPOINTS} \\
                                -e ETCD_CA_CERT_FILE=/etc/etcd/ssl/etcd-root-ca.pem \\
                                -e ETCD_CERT_FILE=/etc/etcd/ssl/etcd.pem \\
                                -e ETCD_KEY_FILE=/etc/etcd/ssl/etcd-key.pem \\
                                -e NODENAME=${HOSTNAME} \\
                                -e IP= \\
                                -e IP_AUTODETECTION_METHOD=can-reach=${K8S_MASTER_IP} \\
                                -e AS=64512 \\
                                -e CLUSTER_TYPE=k8s,bgp \\
                                -e CALICO_IPV4POOL_CIDR=10.20.0.0/16 \\
                                -e CALICO_IPV4POOL_IPIP=always \\
                                -e CALICO_LIBNETWORK_ENABLED=true \\
                                -e CALICO_NETWORKING_BACKEND=bird \\
                                -e CALICO_DISABLE_FILE_LOGGING=true \\
                                -e FELIX_IPV6SUPPORT=false \\
                                -e FELIX_DEFAULTENDPOINTTOHOSTACTION=ACCEPT \\
                                -e FELIX_LOGSEVERITYSCREEN=info \\
                                -e FELIX_IPINIPMTU=1440 \\
                                -e FELIX_HEALTHENABLED=true \\
                                -e CALICO_K8S_NODE_REF=${HOSTNAME} \\
                                -v /etc/calico/ssl:/etc/etcd/ssl \\
                                -v /lib/modules:/lib/modules \\
                                -v /var/lib/calico:/var/lib/calico \\
                                -v /var/run/calico:/var/run/calico \\
                                k8s.yfcloud.com/calico/node:v3.1.0
ExecStop=/usr/bin/docker rm -f calico-node
Restart=always
RestartSec=10[Install]
WantedBy=multi-user.target
EOF

对于以上脚本中的 K8S_MASTER_IP 变量，只需要填写一个 master ip 即可，这个变量用于 calico 自动选择 IP 使用；在宿主机有多张网卡的情况下，calcio node 会自动获取一个 IP，获取原则就是尝试是否能够联通这个 master ip

由于 calico 需要使用 etcd 存储数据，所以需要复制 etcd 证书到相关目录，/etc/calico 需要在每个节点都有

cp -r /etc/etcd/ssl /etc/calico/

5.3 修改 kubelet 配置

使用 Calico 后需要修改 kubelet 配置增加 CNI 设置(–network-plugin=cni)，修改后配置如下

###
# kubernetes kubelet (minion) config
# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--node-ip=192.168.2.219"
# The port for the info server to serve on
# KUBELET_PORT="--port=10250"
# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=master219"
# location of the api-server
# KUBELET_API_SERVER=""
# Add your own!
KUBELET_ARGS="  --bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig \
                --cert-dir=/etc/kubernetes/ssl \
                --cgroup-driver=cgroupfs \
                --cluster-dns=10.254.0.2 \
                --network-plugin=cni \
                --cluster-domain=cluster.local. \
                --fail-swap-on=false \
                --feature-gates=RotateKubeletClientCertificate=true,RotateKubeletServerCertificate=true \
                --node-labels=node-role.kubernetes.io/master=true \
                --image-gc-high-threshold=70 \
                --image-gc-low-threshold=50 \
                --kube-reserved=cpu=500m,memory=512Mi,ephemeral-storage=1Gi \
                --kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
                --system-reserved=cpu=1000m,memory=1024Mi,ephemeral-storage=1Gi \
                --serialize-image-pulls=false \
                --sync-frequency=30s \
                --pod-infra-container-image=k8s.gcr.io/pause-amd64:3.0 \
                --resolv-conf=/etc/resolv.conf \
                --rotate-certificates"

5.4 创建 Calico Daemonset

# 先创建 RBAC
kubectl apply -f \
https://docs.projectcalico.org/v3.1/getting-started/kubernetes/installation/rbac.yaml# 再创建 Calico Daemonset
kubectl create -f calico.yaml

5.5 启动 Calico Node

systemctl daemon-reload
systemctl restart calico-node
systemctl enable calico-node# 等待 20s 拉取镜像, 可以提前将镜像拉取
sleep 20
systemctl restart kubelet

5.6 测试网络

# 创建 deployment
cat << EOF >> demo.deploy.yml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: demo-deployment
spec:
  replicas: 5
  selector:
    matchLabels:
      app: demo
  template:
    metadata:
      labels:
        app: demo
    spec:
      containers:
      - name: demo
        image: jevic/demo
        imagePullPolicy: IfNotPresent
        ports:
        - containerPort: 80
EOF
kubectl create -f demo.deploy.yml

测试结果

[root@master219 ~]# kubectl get pod -o wide
NAME                             READY     STATUS    RESTARTS   AGE       IP             NODE
demo-deployment-566fd7b7-fjg7p   1/1       Running   0          3d        10.20.211.67   node220
demo-deployment-566fd7b7-qz5q2   1/1       Running   0          3d        10.20.237.5    master219
demo-deployment-566fd7b7-zzqf9   1/1       Running   0          3d        10.20.206.3    node221
[root@master219 ~]# kubectl exec -it demo-deployment-566fd7b7-fjg7p ping 10.20.206.3
PING 10.20.206.3 (10.20.206.3): 56 data bytes
64 bytes from 10.20.206.3: seq=0 ttl=62 time=0.431 ms
64 bytes from 10.20.206.3: seq=1 ttl=62 time=0.257 ms
64 bytes from 10.20.206.3: seq=2 ttl=62 time=0.246 ms
64 bytes from 10.20.206.3: seq=3 ttl=62 time=0.337 ms
^C
--- 10.20.206.3 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.246/0.317/0.431 ms

六. 部署DNS

6.1 修改配置文件

将下载的 kubernetes-server-linux-amd64.tar.gz 解压后，再解压其中的 kubernetes-src.tar.gz 文件。 coredns 对应的目录是：cluster/addons/dns

# diff coredns.yaml coredns.yaml.base
61c61
<         kubernetes cluster.local. in-addr.arpa ip6.arpa {
---
>         kubernetes __PILLAR__DNS__DOMAIN__ in-addr.arpa ip6.arpa {
103c103
<         image: k8s.yfcloud.com/k8s.gcr.io/coredns:1.0.6
---
>         image: k8s.gcr.io/coredns:1.0.6
153c153
<   clusterIP: 10.254.0.2
---
>   clusterIP: __PILLAR__DNS__SERVER__

6.2 检查coredns

# kubectl get pod -n kube-system  |grep dns
coredns-787558c684-6tlwj                   1/1       Running   0          3d
coredns-787558c684-t4h6j                   1/1       Running   0          3d# kubectl exec -it demo-deployment-566fd7b7-qz5q2 bash
bash-4.4# nslookup kubernetes
nslookup: can't resolve '(null)': Name does not resolveName:      kubernetes
Address 1: 10.254.0.1 kubernetes.default.svc.cluster.local

6.3 DNS 自动扩容

下载源码文件

文件路径: kubernetes/kubernetes-src1.10.1/cluster/addons/dns-horizontal-autoscaler

kubectl create -f dns-horizontal-autoscaler.yaml

七. Dashboard

wget https://raw.githubusercontent.com/kubernetes/dashboard/master/src/deploy/recommended/kubernetes-dashboard.yaml -O kubernetes-dashboard.yaml

7.1 配置端口

便于访问配置为: NodePort, 最后的修改部分如下

# ------------------- Dashboard Service ------------------- #kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
spec:
  type: NodePort
  ports:
    - name: dashboard-tls
      port: 443
      targetPort: 8443
      nodePort: 30000
      protocol: TCP
  selector:
    k8s-app: kubernetes-dashboard

执行 kubectl create -f kubernetes-dashboard.yaml 创建即可

7.2 创建Admin 账户

默认情况下部署成功后可以直接访问 https://NODE_IP:30000 访问，但是想要登录进去查看的话需要使用 kubeconfig 或者 access token 的方式；实际上这个就是 RBAC 授权控制，以下提供一个创建 admin access token 的脚本，更细节的权限控制比如只读用户可以参考官方文档

#!/bin/bashif kubectl get sa dashboard-admin -n kube-system &> /dev/null;then
    echo -e "\033[33mWARNING: ServiceAccount dashboard-admin exist!\033[0m"
else
    kubectl create sa dashboard-admin -n kube-system
    kubectl create clusterrolebinding dashboard-admin --clusterrole=cluster-admin --serviceaccount=kube-system:dashboard-admin
fikubectl describe secret -n kube-system $(kubectl get secrets -n kube-system | grep dashboard-admin | cut -f1 -d ' ') | grep -E '^token'

成功后访问如下(如果访问不了的话请检查下 iptable FORWARD 默认规则是否为 DROP，如果是将其改为 ACCEPT 即可)

八. 部署 heapster

官方说明

git clone https://github.com/kubernetes/heapster.git

8.1 grafana NodePort

在官方部署说明中已经有提示,需要将grafana改为NodePort 进而方可使用各节点IP:Port访问，下面列出修改后的配置

.... 省略上面部分 .....
apiVersion: v1
kind: Service
metadata:
  labels:
    # For use as a Cluster add-on (https://github.com/kubernetes/kubernetes/tree/master/cluster/addons)
    # If you are NOT using this as an addon, you should comment out this line.
    kubernetes.io/cluster-service: 'true'
    kubernetes.io/name: monitoring-grafana
  name: monitoring-grafana
  namespace: kube-system
spec:
  # In a production setup, we recommend accessing Grafana through an external Loadbalancer
  # or through a public IP.
  # type: LoadBalancer
  # You could also use NodePort to expose the service at a randomly-generated port
  type: NodePort
  ports:
  - name: grafana-web  ## 自定义
    port: 80
    targetPort: 3000
    nodePort: 30001 ## 30000-50000 自定义
    protocol: TCP
  selector:
    k8s-app: grafana

8.2 执行部署

kubectl create -f deploy/kube-config/influxdb/
kubectl create -f deploy/kube-config/rbac/heapster-rbac.yaml

8.3 查看grafana

面板需要自己手动添加

8.4 访问Dashboard

可以看到界面上面已经显示内存 CPU资源图表

九. 其他说明:

9.1 coredns

如果配置失败或者报错请检查 /etc/resolv.conf 域名解析配置

cat /etc/resolv.conf
# Generated by NetworkManager
#search lan
#nameserver 192.168.1.1
nameserver 223.5.5.5
nameserver 8.8.8.8

GCR 镜像被墙

默认kubernetes 镜像被托管在Google仓库无法被正常获取,使用开源社区镜像仓库Pull 即可参考GCR Google Container Registry 镜像

dashboard

直接使用kubernetes-src 里面的yaml文件创建即可,记得修改NodePort

heapster

同样直接使用github 官方提供的说明配置即可, 其他部署方式都不靠谱